皮尔兹PILZ 皮尔兹PILZ PMCtendo SZ.31/1/2/2/7/K/H/30/00 Mo = 0,95Nm Io = 2,02AUN = 400V nN = 3000min-1Jmot = 0,376 kgcm2Encoder EQN 1135 EnDat2.2 multiturn;with brake;

型号： PMCtendo SZ.31/1/2/2/7/K/H/30/00

订货号： 8177047

皮尔兹PILZ 皮尔兹PILZ PMCtendo SZ.72/0/1/2/7/K/H/30/00 Mo = 14,4Nm Io = 9,6AUN = 400V nN = 3000min-1Jmot = 13,70 kgcm2Encoder ECI 1118 EnDat2.2 singleturn;without brake;

型号： PMCtendo SZ.72/0/1/2/7/K/H/30/00

订货号： 8177083

皮尔兹PILZ 皮尔兹PILZ PMC SC6A261Z/EC 1x 19A Stand-alone PMC SC6 drive controllerTechnical data at 3 x 400 V AC:Nominal output current: 1x 19 A @ 4kHz / 1x 15 A @ 8kHz.Imax: 210% for 2s / 250% for 2s.Apparent power: 13.2 KVA.Without brake r...  更多

型号： PMC SC6A261Z/EC 1x 19A

订货号： 8C000083

皮尔兹PILZ 皮尔兹PILZ PMCtendo DD5.03/A00/0/0/0/110-230VAC Servo amplifiersTechnical Detailsat 3 x 230 V AC supply voltage:Permanent output current: 3 A;Imax (5 sec.) = 9 A;Power consumption in S1 operation: 1,1 kVAInternal brake resistor and mains filt...  更多

型号： PMCtendo DD5.03/A00/0/0/0/110-230VAC

订货号： 8176851

皮尔兹PILZ 皮尔兹PILZ PMCprotego D.06/000/0/0/2/208-480VAC 伺服放大器，连续输出电流为3 x 400 V AC：6 A，2 s峰值输出电流：18 A，5 s峰值输出电流：12 A，S1操作时的功耗：4.5 kVA，集成式制动电阻器。

型号： PMCprotego D.06/000/0/0/2/208-480VAC

订货号： 8176102

皮尔兹PILZ 皮尔兹PILZ PMCprotego D.06/010/0/0/2/208-480VAC Technical data at 3 x 400 V AC: Continuous output current: 6 A; Imax(2 s) = 18 A; Imax (5 s) = 12 A; Power consumption in S1 mode: 4.5 kVAIntegral brake resistor Further hardware options: Expansion ...  更多

型号： PMCprotego D.06/010/0/0/2/208-480VAC

订货号： 8176530

皮尔兹PILZ 皮尔兹PILZ PMCtendo SZ.42/1/1/2/7/K/H/30/00 Mo = 5.2 Nm Io = 4.80 A UN = 400 V nN = 3000 min-1 Jmot = 1.63 kgcm2Encoder ECI 1118 EnDat2.2 single-turn; with brake.

型号： PMCtendo SZ.42/1/1/2/7/K/H/30/00

订货号： 8177007

皮尔兹PILZ 皮尔兹PILZ PMCprotego D.12/010/0/0/2/208-480VAC Technical data at 3 x 400 V AC: Continuous output current: 12 A; Imax(5 s) = 24 A; Power consumption in S1 mode: 9 kVA Integral brakeresistor Further hardware options: Expansion card PosI/O.

型号： PMCprotego D.12/010/0/0/2/208-480VAC

订货号： 8176540

皮尔兹PILZ 皮尔兹PILZ PMCtendo SZ.73/0/1/2/7/K/H/30/00 Mo = 20.8 Nm Io = 14.0 A UN = 400 V nN = 3000 min-1 Jmot = 21.6 kgcm2Encoder ECI 1118 EnDat2.2 single-turn; without brake.

型号： PMCtendo SZ.73/0/1/2/7/K/H/30/00

订货号： 8177025

皮尔兹PILZ 皮尔兹PILZ PMCtendo SZ.44/1/2/2/7/K/H/60/00 Mo = 8.40 Nm; Io = 9.78 A; UN = 400 V; nN = 6000 min-1;Jmot = 3.546 kgcm2; Encoder EQN 1135 EnDat2.2 multiturn; without brake.

型号： PMCtendo SZ.44/1/2/2/7/K/H/60/00

订货号： 8177509

皮尔兹PILZ 皮尔兹PILZ PMC EZ404UDBBQ7P116 EZ-Servo motors:Mo = 8,60Nm; Io = 6,60A; UN = 400V; nN = 3000min-1; Jmot = 3,546kgcm2;Encoder EQI 1131-E3 EnDat 3.0 multiturn; with brake;

型号： PMC EZ404UDBBQ7P116

订货号： 8G000016

皮尔兹PILZ 皮尔兹PILZ PMCprotego D.03/20G/0/0/2/208-480VAC 伺服放大器，连续输出电流为 3 x 400 VAC：3 A，2秒内的峰值输出电流：9 A，5 秒的峰值输出电流：6 A，S1模式下的功耗：2.2 kVA，集成制动电阻器，硬件选件：扩展卡PMCprotego S3.SN 8DI 6DO EI BR，扩展卡PROFIBUS DP Slave

型号： PMCprotego D.03/20G/0/0/2/208-480VAC

订货号： 8178001

皮尔兹PILZ 皮尔兹PILZ PMC brakeresistor FGFKQU31009/14R4/4500W Braking resistor for power supply PS6.Technical data:Type Steel-grid fixed resistor.Resistance 14.4 Ohm.Power 4500 W.with temperature switch.with UL certification.

型号： PMC brakeresistor FGFKQU31009/14R4/4500W

订货号： 8C000190

皮尔兹PILZ 皮尔兹PILZ PMC SC6A162X/EC 2X 10A Stand-alone PMC SC6 drive controllerTechnical data at 3 x 400 V AC:Nominal output current: 2x 10 A @ 4kHz / 2x 9.0 A @ 8kHz.Imax: 210% for 2s / 250% for 2s.Apparent power: 2x 6.95 KVA.Without bra...  更多

型号： PMC SC6A162X/EC 2X 10A

订货号： 8C000194

皮尔兹PILZ 皮尔兹PILZ PMCcable FD/D4B8/010/Q25/S1 Feedback cable for EnDat 2.2; Cable assembled on both sides Sub-D15connector <> con.15 round connector 12-pin SpringTec; suitable for allPMC servo controllers (DD5, protego) and the motors PMCtendo...  更多

型号： PMCcable FD/D4B8/010/Q25/S1

订货号： 8177272

皮尔兹PILZ 皮尔兹PILZ PMC DL6B11 Quick DC-Link &gt; SC/SI6A1&amp;2 Rear section module for drive controllers of size 1 or 2:SC6A162, SC6A261, SI6A161, SI6A162, SI6A261#The quick fastening clamps for attaching the copper rails and aninsulation connection piece are...  更

型号： PMC DL6B11 Quick DC-Link > SC/SI6A1&2

订货号： 8C000087

皮尔兹PILZ 皮尔兹PILZ PMCcable M3/E1C3/015/6Q0/S1 Power cable.cable assembled on both sides Crimp connectors <> con.40 round con nector8-pin.No. of wires and cross section (4 × 6,0 + (2 × 1,5) + (2 × 1,0)) mm².suitable for all PMC servo controlle...  更多

型号： PMCcable M3/E1C3/015/6Q0/S1

订货号： 8C000135

皮尔兹PILZ 皮尔兹PILZ PMCcable FD/G4GB/005/Q25/S1 Encoder cable for EnDat 2.1/2.2 digital.Cable assembled on both sides Sub-connector <> con.17 round connec tor12-pin.No. of wires and cross section (3 x 2 x 0,14 mm² + 2 x 0,25 mm²).suitable for a...  更多

型号： PMCcable FD/G4GB/005/Q25/S1

订货号： 8C000109

皮尔兹PILZ 皮尔兹PILZ PMCcable M3/E1C2/015/2Q5/S1 Power cable.cable assembled on both sides Crimp connectors <> con.23 round con nector8-pin.No. of wires and cross section (4 × 2,5 + 2 × (2 × 1,0)) mm².suitable for all PMC servo controllers (SC6,...  更多

型号： PMCcable M3/E1C2/015/2Q5/S1

订货号： 8C000141

皮尔兹PILZ 皮尔兹PILZ PMCcable M3/E1C3/010/2Q5/S1 Power cable.cable assembled on both sides Crimp connectors <> con.40 round con nector8-pin.No. of wires and cross section (4 × 2,5 + 2 × (2 × 1,0)) mm².suitable for all PMC servo controllers (SC6,...  更多

型号： PMCcable M3/E1C3/010/2Q5/S1

订货号： 8C000158

皮尔兹PILZ 皮尔兹PILZ PMCcable M3/E1C2/010/1Q5/S1 Power cable.cable assembled on both sides Crimp connectors <> con.23 round con nector8-pin.No. of wires and cross section (4 × 1,5 + (2 × 1,0) + (2 × 0,50)) mm² .suitable for all PMC servo control...  更多

型号： PMCcable M3/E1C2/010/1Q5/S1

订货号： 8C000170

皮尔兹PILZ 皮尔兹PILZ PMCprotego motor connector kit consisting of connector X9 and shielded terminal for devices up to 24A.

型号： PMCprotego motor connector kit

订货号： 8176330

皮尔兹PILZ 皮尔兹PILZ PMCcable M2/C2B2/015/1Q5/S1 Power cable; Cable assembled on both sides Connector <> con.23 rou ndconnector 8-pin SpeedTec; No. of wires and cross section (4x1.5+1x(2x1.0)) suitable for PMCprotego D.01-24 and the motors PMCtend...  更多

型号： PMCcable M2/C2B2/015/1Q5/S1

订货号： 8177153

皮尔兹PILZ 皮尔兹PILZ PMC SI6A361 terminal set (Z/U/Y/X) Terminal set for drive controllers SI6A361Z, SI6A361U, SI6A361Y,SI6A361X

型号： PMC SI6A361 terminal set (Z/U/Y/X)

订货号： 8C000054

皮尔兹PILZ 皮尔兹PILZ PMC SC6A162Z/PN 2x 10A Stand-alone PMC SC6 drive controllerTechnical data at 3 x 400 V AC:Nominal output current: 2x 10 A @ 4kHz / 2x 9.0 A @ 8kHz.Imax: 210% for 2s / 250% for 2s.Apparent power: 2x 6.95 KVA.Without bra...  更多

型号： PMC SC6A162Z/PN 2x 10A

订货号： 8C000076

皮尔兹PILZ 皮尔兹PILZ PMCtendo SZ.42/0/1/2/7/K/H/60/00 Mo = 4.9 Nm Io = 7.43 A UN = 400 V nN = 6000 min-1 Jmot = 1.63 kgcm2Encoder ECI 1118 EnDat2.2 single-turn; without brake.

型号： PMCtendo SZ.42/0/1/2/7/K/H/60/00

订货号： 8177036

皮尔兹PILZ 皮尔兹PILZ PMCtendo SZ.42/1/2/2/7/K/H/30/00 Mo = 5,2Nm Io = 4,80AUN = 400V nN = 3000min-1Jmot = 2,196 kgcm2Encoder EQN 1135 EnDat2.2 multiturn;with brake;

型号： PMCtendo SZ.42/1/2/2/7/K/H/30/00

订货号： 8177045

皮尔兹PILZ 皮尔兹PILZ PMCtendo SZ.33/1/2/2/7/K/H/30/00 please maintain

型号： PMCtendo SZ.33/1/2/2/7/K/H/30/00

订货号： 8177075

皮尔兹PILZ 皮尔兹PILZ PMC SI6A062 terminal set (Z/U/Y/X) Terminal set for drive controllers SI6A062Z, SI6A062U, SI6A062Y,SI6A062X

型号： PMC SI6A062 terminal set (Z/U/Y/X)

订货号： 8C000014

皮尔兹PILZ 皮尔兹PILZ PMC SC6A162 terminal set (Z/U/Y/X) Terminal set for drive controllers SC6A162Z, SC6A162U, SC6A162Y,SC6A162X

型号： PMC SC6A162 terminal set (Z/U/Y/X)

订货号： 8C000070